从1,500,000教师库中查找（输入学校名称或教师姓名）
胡献国老师介绍
胡献国 教授、博士生导师、合肥工业大学摩擦学研究所副所长
通信地址：安徽省合肥市屯溪路193号合肥工业大学摩擦学研究所
电话：0551-2901756-2731
E-mail: 2902956@163.com
教育经历：
2002.06 匈牙利圣伊斯特万大学，工学博士
1988.07 合肥工业大学，工学硕士
1985.07 合肥工业大学，工学学士
研究领域：
先进材料摩擦与磨损：纳米二硫化钼，插层二硫化钼，纳米复合自润滑材料，纳米复合涂层，含油聚甲醛，热障（低散热）功能梯度材料.
特种润滑剂与工艺润滑：热轧乳化液，极压防锈磨削乳化液，线切割乳化液，拉丝乳化液，合成磨削液，磨削微乳液，超硬材料磨削液（玻璃镜片、陶瓷、硬质合金、金刚石），高温润滑剂.
摩擦学环境设计：废油再生，可生物降解润滑剂，油-水分离技术与装备，极端环境条件下的摩擦学设计，生物质燃料的腐蚀与磨损.
在研项目：
1.教育部高等学校骨干教师资助计划项目 <<内燃机油中醇类化合物的摩擦化学作用及其抗磨减摩机理>> (批准号: GG-802-10359-1853)
2.安徽省自然科学基金资助项目 <<超细润滑级二硫化钼的制备及其摩擦学特性的研究>> (批准号:00046103)
3.科技部国际科技合作项目<<机械和食品工业含油废水的膜分离特性研究>>(批准号: CHN33:17)
4.教育部留学回国人员科研启动基金资助项目《含油废水-微乳液的膜分离特性研究》(批准号: 030207B2)
5.公司委托项目《H68黄铜热轧乳化润滑液研制》(批准号: 03-94)
6.合肥工业大学中青年科技创新群体计划《纳米结构与功能纳米材料》 (批准号: 103-037016）
7.国家自然科学基金资助项目 <<金属-塑料滑动轴承的超润滑设计与延寿技术>> (批准号:50475071)
8.固体润滑国家重点实验室开放课题 <<纳米MoS2复合涂层的腐蚀摩擦学特性研究>> (批准号:0401)
9.公司委托项目《白铜线材拉丝拉拔润滑工艺研发》(批准号: 05-37）
10.公司委托项目《超硬材料磨削液研制》
11.公司委托项目《熔铸铜合金高温润滑材料与润滑工艺研究》
12.公司委托项目《线切割乳化液研制》
13.公司委托项目《新型环保高水基切削液的研制》
部分论文（EI SCI收录）：
1. Hu X -G, Xiang F., The study and application of an anti-adhesive wear lubricant for use in deep drawing, Lubrication Science,1994,7(1):39-48
2. Hu Xian-Guo, Yuan G, Jiang L., Effect of 2-ethylhexanol on properties of zinc dialkyldithiophosphate, Chemische Technik,1996,48(6):334-337
3. X. –G. Hu, E Bekassy-Molnar, Gy Vatai, L Meiszel, J. Ohal, Removal of water from oil-emulsion by ultrafiltration membrane, Hungarian Journal of Industrial Chemistry,1996,24(2):241-246
4. Hu X., Jiang L., Preparation and characterization of oil-containing POM/PU blends, Journal of Synthetic Lubrication,1998,15(1):19-29
5. Hu X -G, Bekassy-Molnar E, Vatai Gy, Meiszel L, Olah J., The study of oil/water separation in emulsion by ultrafiltration membranes, Chemische Technik, 1998, 50(3): 119-123
6. Hu X -G, Jiao M, Yuan G., On the thermal degradation and antiwear performance of zinc dialkyldithiophosphate, Chemische Technik, 1998, 50(5):246-248
7. X. Hu, Tribological behaviour of modified polyacetal against MC nylon without lubrication, Tribology Letters,1998,5(4):313-317
8. Hu X -G,Yuan G, Zhou Z.,Synthesis and characterization of high effective additive, N-containing, zinc diaryldialkyldithiophosphate by Mannich reaction, Lubrication Science,1999,11(2):165-174
9. Xianguo Hu, Friction and wear behaviors of toughened polyoxymethylene blend under water lubrication, Polymer-Plastics Technology & Engineering,2000,39(1): 137-150
10. Hu X -G and Wang L., Wear resistance of steel bonded WC hardfacing layer prepared by plasma arc technique, Surface Engineering, 2000, 16(3):201-204
11. 尹延国，胡献国，崔德密等. 水工混凝土小角度冲蚀磨损特性研究.摩擦学学报,2001,21(2): 126-130
12. Hu Xianguo and Wo Hengzhou, On the role of ketone in the tribological behaviour of zinc dialkyldithiophosphate, Science in China Series A-Mathematics Physics Astronomy,Suppl.S AUG 200144:171-176
13. Hu X -G, Study of friction and wear performance of zinc dialkyldithiophosphate in the presence of trace ketone, Tribology Letters, 2002, 12(1): 67-74
14. Hu Xianguo, Bekassy-Molnar Erika and Vatai Gyula, Characterization of gel concentration in ultrafiltration of oil-in-water emulsion, Hungarian Journal of Industrial Chemistry, 2002, 30(1): 47-52
15. Hu Xianguo, Bekassy-Molnar Erika and Vatai Gyula, Study of ultrafiltration behaviour of emulsified metalworking fluids, Desalination, 2002, 149(1-3): 191-197
16. Hu Xianguo, Momber A. W. and Yin Y., Hydro-abrasive erosion of steel-fiber reinforced hydraulic concrete,Wear,2002,253(7-8):848-854
17. Hu Xianguo, Bekassy-Molnar E. and Vatai Gy., Analysis and characterization of membrane fouling of ultrafiltration separation for oil-in-water emulsion, Chemical Papers, 2003, 57(1):16-20
18. Hu Xianguo, Wo Hengzhou, Hang Guopei and Lu Yaling, Tribochemical effect of impurity of zinc dialkyldithiophosphate in engine oil, Lubrication Science, 2003, 15(4):351-360
19. 沃恒洲，胡坤宏，胡献国。纳米二硫化钼作为机械油添加剂的摩擦学特性研究， 摩擦学学报，2004， 24(1): 33-37
20. Hu Xianguo, Bekassy-Molnar Erika, Koris Andras, Study of modelling transmembrane pressure and gel resistance in ultrafiltration of oily emulsion, Desalination,2004,163:355-360
21. Hu Xianguo, Momber A. W. and Yin Y., et al, High-speed hydrodynamic wear of steel-fibre reinforced hydraulic concrete,Wear,2004,257(5-6):441-450
22. Hu Xianguo, Zhan Song and Zheng Shousen, Study of gray relational grade identification for ferrography based on characteristic analysis of wear debris, Tribotest journal, 2004, 11(1): 57-67
23. Hu Xianguo, Hu Shuli and Zhao Yesong, Synthesis of nanometer molybdenum disulfide particles and its evaluation of friction & wear property, Lubrication Science,?2005,17(3),295-308
24. Xian-Guo Hu, On the size effect of molybdenum disulfide particles on tribological performance,Industrial Lubrication and Tribology,2005,57(6),255-259
25.Xianguo Hu, Yucheng Wu, Guangcheng Yuan, Peng Huang and Hefeng Jing, Tribological properties of nano-sized molybdenum disulfide particles, World Tribology Conference III, Washington Hilton, Washington DC, USA , September 12-16, 2005.p.303-304
26. Xianguo Hu, Emulsion for single phase alpha-brass in hot rolling process: case study, World Tribology Conference III ,Washington Hilton,WashingtonDC,USA ,September 12-16,2005. p.805-806
27. 王佑荣，谢有红，胡献国。H68黄铜热轧润滑油的研制及应用，润滑与密封，2005,(5):139-142
28. Xianguo Hu, E. Bekassy-Molnar, Gy. Vatai and A. Koris, Ultrafiltration of oily emulsion for metal cutting fluid: role of feed temperature, Environment Protection Engineering. 2005, 31(3/4): 109-118
29. Xianguo Hu, and Jinpei Wan, Study of biodegradation properties of phthalate esters in aqueous culture conditions, Journal of Synthetic Lubrication,2006,23.(即将发表)
30. X. G. Hu, X. J. Sun and K. H. Hu，Preparation parameters optimization of noncrystalline MoS3 - the precursor of nano-MoS2, Solid State Phenomena，2006,(即将发表)
31. X. G. Hu, A.W. Momber and Y. G. Yin, Erosive wear of hydraulic concrete with low steel fibre content,Journal of Hydraulic Engineering, ASCE,2006,132 (已录用)
通信地址：安徽省合肥市屯溪路193号合肥工业大学摩擦学研究所
电话：0551-2901756-2731
E-mail: 2902956@163.com
教育经历：
2002.06 匈牙利圣伊斯特万大学，工学博士
1988.07 合肥工业大学，工学硕士
1985.07 合肥工业大学，工学学士
研究领域：
先进材料摩擦与磨损：纳米二硫化钼，插层二硫化钼，纳米复合自润滑材料，纳米复合涂层，含油聚甲醛，热障（低散热）功能梯度材料.
特种润滑剂与工艺润滑：热轧乳化液，极压防锈磨削乳化液，线切割乳化液，拉丝乳化液，合成磨削液，磨削微乳液，超硬材料磨削液（玻璃镜片、陶瓷、硬质合金、金刚石），高温润滑剂.
摩擦学环境设计：废油再生，可生物降解润滑剂，油-水分离技术与装备，极端环境条件下的摩擦学设计，生物质燃料的腐蚀与磨损.
在研项目：
1.教育部高等学校骨干教师资助计划项目 <<内燃机油中醇类化合物的摩擦化学作用及其抗磨减摩机理>> (批准号: GG-802-10359-1853)
2.安徽省自然科学基金资助项目 <<超细润滑级二硫化钼的制备及其摩擦学特性的研究>> (批准号:00046103)
3.科技部国际科技合作项目<<机械和食品工业含油废水的膜分离特性研究>>(批准号: CHN33:17)
4.教育部留学回国人员科研启动基金资助项目《含油废水-微乳液的膜分离特性研究》(批准号: 030207B2)
5.公司委托项目《H68黄铜热轧乳化润滑液研制》(批准号: 03-94)
6.合肥工业大学中青年科技创新群体计划《纳米结构与功能纳米材料》 (批准号: 103-037016）
7.国家自然科学基金资助项目 <<金属-塑料滑动轴承的超润滑设计与延寿技术>> (批准号:50475071)
8.固体润滑国家重点实验室开放课题 <<纳米MoS2复合涂层的腐蚀摩擦学特性研究>> (批准号:0401)
9.公司委托项目《白铜线材拉丝拉拔润滑工艺研发》(批准号: 05-37）
10.公司委托项目《超硬材料磨削液研制》
11.公司委托项目《熔铸铜合金高温润滑材料与润滑工艺研究》
12.公司委托项目《线切割乳化液研制》
13.公司委托项目《新型环保高水基切削液的研制》
部分论文（EI SCI收录）：
1. Hu X -G, Xiang F., The study and application of an anti-adhesive wear lubricant for use in deep drawing, Lubrication Science,1994,7(1):39-48
2. Hu Xian-Guo, Yuan G, Jiang L., Effect of 2-ethylhexanol on properties of zinc dialkyldithiophosphate, Chemische Technik,1996,48(6):334-337
3. X. –G. Hu, E Bekassy-Molnar, Gy Vatai, L Meiszel, J. Ohal, Removal of water from oil-emulsion by ultrafiltration membrane, Hungarian Journal of Industrial Chemistry,1996,24(2):241-246
4. Hu X., Jiang L., Preparation and characterization of oil-containing POM/PU blends, Journal of Synthetic Lubrication,1998,15(1):19-29
5. Hu X -G, Bekassy-Molnar E, Vatai Gy, Meiszel L, Olah J., The study of oil/water separation in emulsion by ultrafiltration membranes, Chemische Technik, 1998, 50(3): 119-123
6. Hu X -G, Jiao M, Yuan G., On the thermal degradation and antiwear performance of zinc dialkyldithiophosphate, Chemische Technik, 1998, 50(5):246-248
7. X. Hu, Tribological behaviour of modified polyacetal against MC nylon without lubrication, Tribology Letters,1998,5(4):313-317
8. Hu X -G,Yuan G, Zhou Z.,Synthesis and characterization of high effective additive, N-containing, zinc diaryldialkyldithiophosphate by Mannich reaction, Lubrication Science,1999,11(2):165-174
9. Xianguo Hu, Friction and wear behaviors of toughened polyoxymethylene blend under water lubrication, Polymer-Plastics Technology & Engineering,2000,39(1): 137-150
10. Hu X -G and Wang L., Wear resistance of steel bonded WC hardfacing layer prepared by plasma arc technique, Surface Engineering, 2000, 16(3):201-204
11. 尹延国，胡献国，崔德密等. 水工混凝土小角度冲蚀磨损特性研究.摩擦学学报,2001,21(2): 126-130
12. Hu Xianguo and Wo Hengzhou, On the role of ketone in the tribological behaviour of zinc dialkyldithiophosphate, Science in China Series A-Mathematics Physics Astronomy,Suppl.S AUG 200144:171-176
13. Hu X -G, Study of friction and wear performance of zinc dialkyldithiophosphate in the presence of trace ketone, Tribology Letters, 2002, 12(1): 67-74
14. Hu Xianguo, Bekassy-Molnar Erika and Vatai Gyula, Characterization of gel concentration in ultrafiltration of oil-in-water emulsion, Hungarian Journal of Industrial Chemistry, 2002, 30(1): 47-52
15. Hu Xianguo, Bekassy-Molnar Erika and Vatai Gyula, Study of ultrafiltration behaviour of emulsified metalworking fluids, Desalination, 2002, 149(1-3): 191-197
16. Hu Xianguo, Momber A. W. and Yin Y., Hydro-abrasive erosion of steel-fiber reinforced hydraulic concrete,Wear,2002,253(7-8):848-854
17. Hu Xianguo, Bekassy-Molnar E. and Vatai Gy., Analysis and characterization of membrane fouling of ultrafiltration separation for oil-in-water emulsion, Chemical Papers, 2003, 57(1):16-20
18. Hu Xianguo, Wo Hengzhou, Hang Guopei and Lu Yaling, Tribochemical effect of impurity of zinc dialkyldithiophosphate in engine oil, Lubrication Science, 2003, 15(4):351-360
19. 沃恒洲，胡坤宏，胡献国。纳米二硫化钼作为机械油添加剂的摩擦学特性研究， 摩擦学学报，2004， 24(1): 33-37
20. Hu Xianguo, Bekassy-Molnar Erika, Koris Andras, Study of modelling transmembrane pressure and gel resistance in ultrafiltration of oily emulsion, Desalination,2004,163:355-360
21. Hu Xianguo, Momber A. W. and Yin Y., et al, High-speed hydrodynamic wear of steel-fibre reinforced hydraulic concrete,Wear,2004,257(5-6):441-450
22. Hu Xianguo, Zhan Song and Zheng Shousen, Study of gray relational grade identification for ferrography based on characteristic analysis of wear debris, Tribotest journal, 2004, 11(1): 57-67
23. Hu Xianguo, Hu Shuli and Zhao Yesong, Synthesis of nanometer molybdenum disulfide particles and its evaluation of friction & wear property, Lubrication Science,?2005,17(3),295-308
24. Xian-Guo Hu, On the size effect of molybdenum disulfide particles on tribological performance,Industrial Lubrication and Tribology,2005,57(6),255-259
25.Xianguo Hu, Yucheng Wu, Guangcheng Yuan, Peng Huang and Hefeng Jing, Tribological properties of nano-sized molybdenum disulfide particles, World Tribology Conference III, Washington Hilton, Washington DC, USA , September 12-16, 2005.p.303-304
26. Xianguo Hu, Emulsion for single phase alpha-brass in hot rolling process: case study, World Tribology Conference III ,Washington Hilton,WashingtonDC,USA ,September 12-16,2005. p.805-806
27. 王佑荣，谢有红，胡献国。H68黄铜热轧润滑油的研制及应用，润滑与密封，2005,(5):139-142
28. Xianguo Hu, E. Bekassy-Molnar, Gy. Vatai and A. Koris, Ultrafiltration of oily emulsion for metal cutting fluid: role of feed temperature, Environment Protection Engineering. 2005, 31(3/4): 109-118
29. Xianguo Hu, and Jinpei Wan, Study of biodegradation properties of phthalate esters in aqueous culture conditions, Journal of Synthetic Lubrication,2006,23.(即将发表)
30. X. G. Hu, X. J. Sun and K. H. Hu，Preparation parameters optimization of noncrystalline MoS3 - the precursor of nano-MoS2, Solid State Phenomena，2006,(即将发表)
31. X. G. Hu, A.W. Momber and Y. G. Yin, Erosive wear of hydraulic concrete with low steel fibre content,Journal of Hydraulic Engineering, ASCE,2006,132 (已录用)
胡献国老师相关教学资源
